() 해외배송 가능
Enhanced Hammer Housing
Highlighted features
Enhanced Hammer Housing For TM G17 & G19
Fully CNC from aircraft grade 7075 Aluminum.
Enhance and smoothen the hammer & slide action, also improved durability.
The strengthened structure can bear with the stronger hammer hit.
Hard Black anodized finish
For 마루이 Glock17, 마루이 G17 Gen4 & G19
**Important Notice**
It may has a condition that your pistol cannot feed the BB bullet due to lightweight gas supply. You just simple remove a spacer to solve the issue. Alternatively, you may consult your gunsmith for advancing fitting to solve this issue as well.
Increasing in FPS can be achieved; however, it may require other parts to collaborate and advanced skill is needed. improper installation / fitting can shorten the life of the product.
*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising. Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.
교환 및 반품이 가능한 경우
-제품이 미리부터 심하게 훼손되어있는 경우!! 이 때 물건 수령 후 3일 이내에 연락을 주셔야합니다. 사진을 찍어서 메일로 주셔도 증거자료가 될 수 있습니다(wacolt45@hanmail.net)
교환 및 반품이 불가능한 경우
-고객님의 장착시 부주의로 인해 제품이 손상한 경우.
-제품을 뜯어 보신 후 단순히 맘에 들지 않아 마음이 바뀌어 교환을 원하시는 경우.
-제품을 사용하시다가 사용자에 의해서 고장이 난 경우.(이 때는 A/S를 신청해 주십시오)
선택 | 상품명 | 판매가 | 적립금 | 옵션 | 수량 |
---|---|---|---|---|---|
가더 알루미늄 CNC 슬라이드 Aluminum CNC Slide for MARUI G17 Gen4 (블랙) / GLK-211(BK) | 195,000원 | 1,950원 |
|
||
가더 스틸 CNC 슬라이드 for MARUI Glock17 Gen4 (Black) / GLK-215(BK) | 310,000원 | 3,100원 |
|
||
마루이 Glock17 Gen4 가스 블로우백 핸드건 | 320,000원 | 3,200원 |
|
||
[재입고] 마루이 글록19 가스 블로우백 핸드건 Glock19 | 298,000원 | 1원 |
|
||
[신규입고] 마루이 글록17 Gen.5 MOS 가스 블로우백 핸드건 | 325,000원 | 3,250원 |
|
||
가더 알루미늄 CNC 슬라이드 for MARUI G17 Gen4 (Silver) / GLK-211(SV) | 195,000원 | 1,950원 |
|
||
가더社 Aluminum Slide for MARUI V10 (CERAMIC/Silver Polishing) | 190,000원 | 1,900원 |
|
||
가더社 Aluminum Frame for MARUI V10 (CERAMIC/Silver Polishing) | 190,000원 | 1,900원 |
|